Get to Know the Move Diffuser
Frequently Asked Questions
How do I charge the Move Diffuser?
On your first charge of your Move Diffuser, we recommend plugging the charging cord directly into the back of the diffuser. A full charge with your diffuser plugged directly into the wall will take about 1-2 hours (exact charging times may vary). You can also charge your Move Diffuser by plugging in the charging pad and placing the diffuser on top. This method is great for quick battery top-ups and continual use. Once your diffuser is fully charged, the four lights at the back will stop blinking.
What are the run times of the Move Diffuser?
The Move Diffuser has two run times: 4 hours and 8 hours. The 4-hour setting will run continuously. The 8-hour setting will run for 30 seconds and then turn off for 30 seconds, either until the water in the reservoir is low or the time period has ended. As part of an automatic safety feature, our diffusers do not run until the water reservoir is completely empty.
Can the Move Diffuser light be adjusted?
The Move Diffuser has 4 light settings: on, dim, candlelight, and off. You can adjust the light settings by clicking the light button at the back of the diffuser. You can also press and hold the light button to turn off all the lights.
What is the Move Diffuser made of?
The outside of the diffuser is made of metal. The inside reservoir is made from BPA-free plastic.
Because our diffuser is ultrasonic and runs on vibrations instead of heat, there is no interaction between the water, plastic, and essential oils.
How do I clean the Move Diffuser?
To clean the inside of your Move Diffuser, mix a tablespoon of white vinegar with the water in your diffuser, and run it on the continuous cycle for 30 minutes. This will clean out any residue left behind from the essential oils. Make sure your diffuser is not connected to the cord or charging pad, and then rinse it and wipe it dry with a paper towel. We recommend giving your diffuser a deep clean every month.
To clean the outside of your Move Diffuser, simply use a damp cloth to wipe the metal.